Termite damage repair pricing
Termite Damage Repair Cost
Compare termite damage repair costs for cosmetic, framing, subfloor and major structural work, and keep inspection and termite treatment separate from repair.
As of August 2026, minor termite damage repair has a national planning range of about $300–$2,000, while moderate framing or subfloor work can cost $2,000–$5,000. Major structural repairs involving load-bearing walls, floors or multiple support beams can reach $5,000–$15,000 or more. Inspection and active termite treatment are separate scopes.
Prepared by PestCostData Editorial Team · Evidence and methodology reviewed · Updated August 19, 2026
Independent national planning estimate · Not a contractor quote
At a glance
A useful range, not false precision
Lower
$300Typical planning range
$300–$5,000Complex scope
$15,000+The national planning range is bounded by two dated consumer-market sources. It is not a ZIP-level local price or contractor quote.
Price breakdown
Repair cost follows the damaged component, not the termite treatment method
Repair should begin after active termites are addressed and the damaged area is exposed. Cosmetic patches, framing and load-bearing components require different trades, materials and inspection steps.
Drywall holes, paint, trim and other surface-level repairs without major framing replacement.
Framing, subfloor work or replacement of a limited structural component such as one support beam.
Floors, load-bearing walls, multiple beams or other work that affects structural integrity.
Published inspection range when the safety or repair design of structural components requires licensed evaluation.
Separate pest-control scope that depends on method; it should not be hidden inside a repair-only quote.
HomeGuide supplies the minor, moderate and major repair bands. Angi separately reports common repair around $600–$3,000, severe structural work up to $6,000 and smaller board or joint repairs from $250.
Scope scenarios
Why two valid quotes can be far apart
Cosmetic wall or trim damage
$300–$2,000Small drywall, paint, trim or superficial wood repairs after the affected area is confirmed.Localized framing or subfloor
$2,000–$5,000Repair extends beyond the surface but remains limited to a defined room or structural component.Major structural damage
$5,000–$15,000+Multiple beams, load-bearing walls, floors or hidden damage can require engineering, permits and several trades.What changes the cost?
Cosmetic or structural
Surface damage is less expensive than weakened beams, joists, subfloors or load-bearing walls.
Hidden access
Opening walls, floors or crawl spaces adds demolition and restoration labor before the full extent is known.
Moisture damage
Leaks and rot can expand the repair beyond wood consumed by termites.
Engineering and permits
Severe structural damage may require a licensed engineer, permits and inspections.
What a quote should include
Confirm these items
- Defined damaged components
- Material and labor scope
- Access and demolition assumptions
- Repair warranty when offered
Often priced separately
- Termite inspection
- Active termite treatment
- Structural engineer
- Moisture remediation and unrelated remodeling
Questions to ask
- Has active termite treatment been completed?
- Which components are cosmetic versus structural?
- Will hidden damage change the price?
- Are engineering, permits and finish work included?
Quote decision path
Separate the job before comparing the price
Address active termites first
Confirm treatment and follow-up before closing walls or replacing materials that could be damaged again.
Expose and document the repair area
Request photos, damaged-component measurements and a written distinction between cosmetic and structural work.
Match the repair to the qualified trade
Structural framing, electrical, plumbing, drywall and pest control may require different licenses and contracts.
Common follow-up questions
Details that change the decision
Does termite treatment include damage repair?
Usually not. Pest-control treatment addresses active termites or future monitoring, while repair replaces or restores damaged building materials. The contracts should identify the treatment method and damaged components separately.
When is a structural engineer needed for termite damage?
An engineer may be appropriate when damage affects load-bearing walls, beams, joists, foundations, floors or roof supports. The repair contractor should not hide an engineering assessment inside an undefined allowance.
Does homeowners insurance cover termite damage repair?
Standard policies commonly treat termite damage as a maintenance or prevention issue rather than a sudden covered event, but coverage depends on the policy and cause of loss. Ask the insurer for a written coverage determination.
Pricing evidence
Observable ranges used to bound this model
Market cost guides are useful observations, not regulated rates or contractor quotes. We use two publishers and keep their scope visible instead of averaging unlike jobs.
Minor damaged boards through severe structural termite damage repair
Angi reports $600–$3,000 for common termite damage repair, up to $6,000 for severe structural components, and a $250 minor-board floor; treatment remains separate.Minor cosmetic repair through major structural termite damage repair
The source separates minor $300–$2,000, moderate $2,000–$5,000 and major $5,000–$15,000+ repair; inspection and termite treatment are not folded into the repair model.Scope and safety references